Leave Your Message

Flanging Machine & Seaming Machine for Washing Machine Drum Production

The Flanging Machine and Seaming Machine are standalone forming units developed for front-loading washing machine drum production.Both machines feature servo-driven mechanisms, quick-change tooling and protective enclosures to accommodate multiple drum models.

    1
    MACHINE 01

    Flanging Machine

    Designed for drum-end flanging using an eight-segment expanding fixture and servo-driven forming rollers.

    2
    MACHINE 02

    Seaming Machine

    Designed for upper and lower drum-edge forming through synchronized rotating tooling, rolling rollers and pressing rollers.

    Working Process

    From manual loading to finished drum edges: follow the five steps of each machine cycle.

    3
    01 Flanging Machine Process
    • 1

      Model Selection & Tooling Setup

      Select the appropriate drum model and prepare the corresponding tooling.

    • 2

      Manual Drum Loading

      Place the drum into the machine and initiate the operating cycle.

    • 3

      Drum Positioning

      The drum is positioned and secured for the forming operation.

    • 4

      Flanging Operation

      The machine forms the drum edge to the required profile.

    • 5

      Cycle Completion

      The forming cycle is completed, and the drum is ready for unloading.

    4
    02 Seaming Machine Process
    • 1

      Model Selection & Tooling Setup

      Select the required drum model and prepare the corresponding forming tools.

    • 2

      Manual Drum Loading

      Place the drum into the machine and initiate the operating cycle.

    • 3

      Drum Positioning

      The drum is securely positioned for the forming operation.

    • 4

      Edge Rolling & Pressing

      The machine performs rolling and pressing operations to achieve the required drum-edge profile.

    • 5

      Cycle Completion

      The forming cycle is completed, and the drum is ready for unloading.

    Key Mechanical Features

    A closer look at the fixtures, forming mechanisms and machine structures of each machine.

    01 Flanging Machine — Key Features
    5

    Eight-Segment Expanding Fixture

    The pneumatic expanding fixture features eight aluminum-alloy segments with rubber-coated surfaces to clamp the drum and help prevent scratches on its inner surface.

    6

    Servo-Controlled Height Adjustment

    A servo-driven lifting mechanism adjusts the upper assembly for drums of different heights, supporting rapid model switching.

    7

    Adjustable Flanging Rollers

    Two servo-driven flanging roller assemblies provide adjustable front-to-back and height positioning for the forming operation.

    02 Seaming Machine — Key Features
    8

    Synchronized Upper & Lower Rotation

    Servo-driven upper and lower rotating assemblies provide synchronized motion during drum-edge forming.

    9

    Rolling & Pressing Roller Sets

    Upper and lower rolling rollers form the drum edges first, followed by dedicated pressing rollers to complete the operation.

    10

    Four-Column Machine Structure

    A welded four-column frame provides structural support for the rotating and pressing mechanisms during processing.

    FLEXIBLE TOOLING

    Quick Tool Changeover for Multiple Drum Models

    Both the Flanging Machine and Seaming Machine support quick tooling changeover to accommodate different washing machine drum models. Interchangeable tooling allows the equipment to adapt to model-specific production requirements.

    ≤5 min
    Tool Changeover
    1
    Operator for Changeover
    ≥800,000
    Specified Tooling Life / Cycles

    Tooling Configuration

    Item

    Flanging Machine

    Seaming Machine

    Tooling Type

    Replaceable Flanging Tooling

    Replaceable Seaming Tooling

    Tool Changeover

    ≤5 min, 1 Operator

    ≤5 min, 1 Operator

    Tooling Configuration

    According to Drum Models

    According to Drum Models

    Tooling Material

    Selected for Production Requirements

    Selected for Production Requirements

    Operation, Safety & Maintenance

    6

    Operation & Monitoring

    HMI-based model selection allows operators to configure the required drum model. A network module provides access to equipment operating status and parameters.

    7

    Safety Protection

    Sheet-metal and acrylic guards enclose the machine. Safety doors, light curtains and two-hand controls provide protection around operator access areas.

    8

    Maintenance Features

    Automatic guide lubrication supports routine maintenance. The Seaming Machine also includes an oil-mist system for the rolling process and an air gun for cleaning.

    Delivery & Service

    Why choose IDO Technology (5)

    Installation & Commissioning

    Equipment installation, commissioning and acceptance support according to the agreed project scope.

    Why choose IDO Technology (3)

    Operator Training

    Training covering equipment operation, routine maintenance and the working principles of major components.

    Why choose IDO Technology (4)

    Technical Documentation

    Equipment layout drawings, operating and maintenance manuals, electrical diagrams, spare-parts lists and control programs.

    Why choose IDO Technology (1)

    12-Month Warranty

    A twelve-month equipment warranty commencing from final acceptance, according to the agreed project terms.

    Training and After-Sales Support

    What is the difference between the Flanging Machine and Seaming Machine?

    The Flanging Machine uses an expanding fixture and flanging rollers to form the drum edge. The Seaming Machine uses synchronized rotating tooling to perform upper and lower edge rolling followed by pressing.

    Can the machines process different washing machine drum models?

    Yes. The referenced configuration supports six drum variants with interchangeable tooling. Compatibility with other dimensions requires tooling and equipment specification review.

    How long does a tooling changeover take?

    The specified tooling changeover time is no more than five minutes with one operator for each machine.

    Do the machines support automatic loading and unloading?

    The specified configuration uses manual loading. Robot-assisted unloading can be considered for future integration.

    What utilities are required for operation?

    The specified requirements are AC 380V ±10%, 50Hz, three-phase five-wire power and dry compressed air at 0.5–0.7 MPa.

    SEND INQUIRY

    When you are keen on any of our products, please feel free to contact with us. You can reach us out via phone, email and SNS etc., we will response to you as soon as possible.